Electromagnetic floweter

Model :

EF2000

Price :
Packaging :
Minimum order :
Negotiable
Standard :
Production power :
Negotiable
Payment type :
Advance Payment
Post type :
Negotiable
Description :

The conductor fluid passes through the flowmeter and the voltage is induced. In order to increase the accuracy of measurement and detect the fill or empty of the pipe, four electrodes have been inserted. The flow rate is calculated proportionate to the diameter of the pipe. • Application: • Measurement of all fluids with a minimum conductivity of 5µS • Applicable for acidic, alkaline, pasty and viscous materials, non-oil paints • Technical Specifications: • Maximum error 0.2% in full scale value • Operating temperature range -20°C to 60°C for transmitter, LCD and the maximum temperature of sensor 250°C depending on the type of lining • Measurement of flow rate, diameter 1 to 40 inches • Flow measurement in two directions, negative flow measurement, and the possibility of detecting the empty pipe • Production up to 100 bar working pressure range • 20-4 mA analog output isolated, RS485 port isolated with standard RTU MODBUS, RTU and ASCII protocols • SFD Intelligent Detection System • Internal averaging system to increase stability • Adjustable cutoff surface to remove low flow • Selection of lining material:  HDPE (High Density Poly Ethylene) (>DN 25) ” ” ” 80°C  GPR (Glass Reinforced Polymer) (>DN 100) ” ” ” 250°C  PTFE (Poly Tetra Fluoro Ethylene) (>DN 25) ” ” ” 130°C • Optical switches capable of operating in the worst environmental conditions • Ingress Protection (IP68) for both section of flowmeter • Internal totalizer to save data up to 10 years • display information: • Graphic LCD 128*64PX • Integrated and separate system structure • Isolation of transmitter and monitor of sensor at 300m distance without affecting measurement accuracy


Register your request




Last seen

Scroll to top