Industrial oil vacuum purification

Company name :
Model :

Price :
Packaging :
Minimum order :
Negotiable
Standard :
Production power :
Negotiable
Payment type :
Full Advance Payment
Post type :
Negotiable
Description :

Industrial oil purification under vacuum (turbine, hydraulic and lubricants). Purification of Industrial oils to remove water pollution (soluble and emulsion), soluble gases, pending solid particles and volatile substances such as ammonia, alcohol from the oil in the model NNVOPh with capacity of 200 to 15,000 L/H in full automatic or half automatic in stationery or mobile models . Abilities of the system to remove various types of contaminations including: water (soluble and emulsion), gas (hydrogen, oxygen, carbon dioxide, methane, carbon monoxide,..), solid suspended particles and volatile substances like ammonia and alcohol from oil with NASS and ISO standards . The benefits of device Particle decontamination and clarifying to the level of ISO and NASS standards. Raising the resistance of the equipment against the thermal stresses over 85% of system’s failures result from oil contamination. This problem can be eliminated by on time oil purification. This way, we can reduce the costs of oil replacement and also increase the life time of machineries. The additional costs are as a result of the followings : •Loss of production time due to the machine’s failure •Compartments replacement •Oil replacement •Increase in maintenance costs Niroonamad’s purification & filtration systems are able to remove different kinds of contamination such as water(solution & emulsion),gas (hydrogen, oxygen ,carbon dioxide ,carbon monoxide, methane,…), suspended solid particles and volatiles (ammonia ,alcohol,…) from the oil. It helps the oil reaches it’s NASS Standard. Niroonamad’s systems are produced in different capacities, from 500 to 12000L/H. They can be manufactured as portable or stationary. The adventages of system • Can be used for oil filtration and eliminating water content from different kinds of oils. • Able to eliminate the moisture to less than 5 ppm. • Able to separate free water completely. • Able to eliminate different kinds of gases and bubbles from the oil. • Can be used for high volumes and for a long times. • Vacuum distillation systems are able to eliminate the particles which are less than three micron (according to standard NASS class and oil type). • Heating the oil gradually and indirectly (preventing ionization, additives loss and oil degradation). • Fast purification with high efficiency • Separating dissolved gases to 1% vol or even less. • Quick process of separating water from oil. • Able to change the capacity and flow rate of the device. • Alarm screen for detecting the defect. • Using a water trap to minimize gases and moisture pollution. • Using a very big vacuum tank with several layers to break the oil and therefore, increase the process of separating dissolved gases and moisture. • Using flange for ease of installation and quick assembly. • Applying a vacuum pump with ultimate pressure of (1mbar). • Photo sensor to detect the oil foam(if needed). • Installing electronic and mechanical level meter and also a sensor for protecting the oil level and preventing the oil entering the vacuum path. • Changing the temperature of heater according to input power supply. • Able to adjust the oil level easily. • Using two separate filters at inlet path with 10 micron mesh that lets the device absorb very fine particles entering the system. • Using a coalescer filter to eliminate free water. • Installing a solenoid valve through the path to stop oil in the case of emergency. • Digital indicators. • Using a strainer and a magnetic filter for detecting the defects. • Applying the best West European and Iranian equipment. • Installing a solenoid valve through the path to stop oil in the case of emergency. • Digital indicators. • Using a strainer and a magnetic filter for detecting the defects. • Applying the best West European and Iranian equipment. • Equipped with a remote control system (if asked by the customer). • Installing a moisture meter device (moisture sensor) for online monitoring of the moisture ppm (if asked by the customer). • Installing an online particle counter and a moisture sensor (if asked). • Using a strainer and a magnetic filter for absorbing metal particles and large particles as well (in the case of metal contamination). • Designing the device according to the customer’s needs. • Phase control and emergency stop.


Register your request




Last seen

Scroll to top